Alsident System A/S - System 50 Flex is suitable for trades with small pollution sources eg the electronics industry, nail studios and decorator workshops. See our three types here

System 50 Flex in Aluminium and Antistatic

REMEMBER THE ACCESSORIES
A suction pen goes always with the System 50 Flex

Brackets and other accessoriordered separately. See links below.
Click on the article no. below (blue link) for product specification.
alsident® system 50 Flex
AL
 AS
flange + joint
Table 0-joint
Working Range [mm]
Basic
Article no.
Red
White
Black
 Table 0-joint
Article no.
Alsident® System 50 Flex - 0-joint
600
-4
-5
-050
 Alsident® System 50 Flex - 0-joint
Table 1-joint
Working Range [mm]
Basic
Article no.
Red
White
Black
 Table 1-joint
Article no.
Alsident® System 50 Flex - 1-joint
700
-4
-5
-050
 Alsident® System 50 Flex - 1-joint
Table 2-joints
Working Range [mm]
Basic
Article no.
Red
White
Black
 Table 2-joints
Article no.
Alsident® System 50 Flex - 2-joints
900
-4
-5
-050
 Alsident® System 50 Flex - 2-joints
 

Alsident® System 50 Flex - for air volumes between 45-85 m3/h and in diameter Ø50.

Branches
System 50 Flex is applicable in trades with small pollution sources such as the electronics industry, laboratories, nail salons and decorator workshops.
 
ESD-approval
Alsident® System 50 Flex Antistatic is approved for use in ESD-areas according to IEC 61340-5-1:16 and therefore has a wire with a resistance of 1 MW attached to the socket pipe.  Further information in the test report from Danish Technological Institute and in the mounting instructions.
 
Special solutions
In addition to our standard range, we are also able to deliver special solutions adapted to customer specific needs. Our technical department is always at your service with advice. For further information please contact your Alsident® dealer.
 
Please remember that we offer short delivery times for both standard and special solutions of the best Alsident® quality.
Technical Specifications:
aluminium antistatic
Recommended Airflow:
Normal:
Minimum:
Maximum.
.
65 m3/h
45 m3/h
85 m3/h
.
65 m3/h
45 m3/h
85 m3/h
Materials:
Pipes:
Diameter:
Joints:
Flexible hose:
Rings:
O-rings:
Flanges:
Damper:
Thumbscrew:
Threaded Stays:
Spring:
.
Anodized aluminium
Ø50 mm (external)
Polypropylene (PP)
Conductive polystyrene (PS)
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Acid-proof stainless steel (AISI 316L)
Acid-proof stainless steel (AISI 316L)
.
Chromated aluminium (TCP)
Ø50 mm (external)
Conductive polypropylene (PP)
Conductive polystyrene (PS)
Polypropylene (PP)
Conduktive polypropylene (PP)
Conduktive polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Acid-proof stainless steel (AISI 316L)
Acid-proof stainless steel (AISI 316L)
 
Download files:
File
Description
Brochure on System 50 Flex with a complete overview of all the article nos. for this system. In A4 printable pdf.
Test report for different hoods and positions. Tested by the Danish Technological Institute.
Manual on cleaning and maintenance of System 50 Flex, adjusting the spring and positioning the hood.
Link to mounting instructions for System 50 Flex, includes both English, German and Danish.
Test report for ESD-approval tested by Danish Technological Institute
To determine the pressure drop at a specific airflow.