Alsident System A/S - The hoods are available in transparent PETG, in PP for aggressive chemicals and antistatic for ESD and ATEX areas. See applications for each hood for System 75

System 75 Hoods and suctions pens in Aluminium Antistatic and Chemical Resistant

Click on the article no. (blue link below) for product specification.
Alsident® system 75
 AL AS CR APPLICATION
+ colour + colour
Suction Pens
Length
[mm]
Basic
Article no.
Red
White

Suction Pen
Article no.

Suction Pen
Basic
Article no.
 Red White Application
System 75 AL Suction pen 250 mm
250
-
-
 System 75 AS Suction pen 250 mm System 75 PP Suction pen 250 mm 1-7525-7 -4 -5 For small concentrated sources of pollution. Efficient as it gets close to the source without obstructing the work. Carefully made funnel increases the efficiency.
System 75 AL Suction pen 250 mm med PP spids
250
-4
-5
Suction Nozzle
Width
[mm]
Basic
Article no.
Red
White

Suction Nozzle
Article no.

Suction Nozzle
Basic
Article no.
 Red White Application
System 75 AL Suction nozzle 250 mm
250
-4
-5
For concentrated sources of pollution. Internal diffusor pipe to increase efficiency. Often used at soldering processes.
Hoods
Dim.
[mm]
Basic
Article no.
Red
White

Hoods
Article no.

Hoods
Basic
Article no.
 Red White Application
System 75 AL Hood Ø200
Ø200
-4
-5
System 75 PP Hood Ø200 1-7524-7 -4 -5
Metal hood: Recommended when extracting hot gases, fumes, light dust concentrations etc.
System 75 AL Hood Ø200
Ø200
-
-
 System 75 AS Hood Ø200
System 75 AL Square hood 420x320 mm
420 x 320
-4
-5

 
System 75 PP Square hood 420x320 mm 1-754232-7
1-754232-5-7*		 -4

-		 -5

-
Square hood: For both light and heavy fumes/gases. Increased efficiency when placed vertically on surface.
*Transparent PETG with PP stub
System 75 AL Round hood Ø280
Ø280
-4
-5
Round hood: For light fumes/gases and small open vessels. Increased efficiency at an angled position.
*Transparent PETG with PP stub
System 75 AL Round hood Ø385
Ø385
-4
-5
 System 75 AS Round hood Ø385 System 75 PP Round hood Ø385 1-7535-7
1-7535-5-7*		 -4

-		 -5

-
System 75 AL Flat screen 330x240 mm
330 x 240
-4
-5
 System 75 AS Flat screen 330x240 mm System 75 PP Flat screen 330x240 mm 1-753324-7
1-753324-5-7*		 -4

-		 -5

-
Flat Hood: Especially for heavy gases and fumes. High efficiency when placed vertically on a surface
*Transparent PETG with PP stub
The hoods for Alsident® System 75 include a stub pipe.

Note: Conductive PP and transparent PETG withstand max. air temperature at 80° C.
 

SYSTEM 75 AL - ALUMINIUM
The hoods for aluminium extraction arms are available in three different materials: transparent PETG and anodized or powder coated aluminium. The coloured plastic parts are made of polypropylene (PP). The transparent PETG hoods are resistant to most allround cleaning detergents. The hoods can be used together with the System 75 AL extraction arms in working environments with no special requirement for conductivity or chemical resistance.

SYSTEM 75 AS - ANTISTATIC
It is important to choose an antistatic hood if you have chosen an antistatic extraction arm in order to maintain the conductivity. This is particularly important, if the System 75 AS extraction arm is to be mounted in an ESD area or an EX area (ATEX). The antistatic hoods are made of chromated (TCP) aluminium or conductive polypropylene (PP) depending on the chosen model.

SYSTEM 75 PP - CHEMICAL RESTISTANT
The hoods for system 75 PP are available in two materials: chemical resistant polypropylene (PP) or powder coated aluminium. The four hoods in 100% PP are resistant to various chemicals and are therefore applicable in most aggressive working environments.The metal hood Ø200 is made of powder coated aluminium. The chemical resistant hoods together with the System 75 PP extraction arms are applicable in chemical aggressive working environments. Square hoods, round hoods, and flat hoods are also available  i transparent PETG with PP-stub (se article nos. with* above).
COLOURS
In Systems 75 AL and PP it is possible to choose the colour of the hood flange. There are two standard colours: red and white.
The colour code is added to the basic article number as -4 or -5.
 
OPTIMAL POSITION OF THE HOOD
Under Optimal position of the hood you will find an explanation in greater detail of how to position the hood considering source and type of pollution.

Download files:
file
description
Brochure on System 75 with a complete overview of all the article nos. for this system. 
Test report for different hoods and positions. Tested by the Danish Technological Institute.
Manual on cleaning and maintenance of System 75, adjusting the spring and best position of the hoods.