END USER   INSTALLER   SPECIFIER
Maintenance instructions for Alsident System extraction arms

User's Manual for Alsident® System Extraction Arms

On this page you will find all the documents for the user's manual and maintenance. There are five documents available with the User's Manual as the main document. The User's Manual can be extended with the following documents: "Demounting of Gas Spring", "Capture Efficiency", "Cleaning" and "Test and Approvals".
 
The content of the User's Manual is:
 
  • Technical terms
  • Correct position of the extraction arm
  • Operation of the extraction arm
  • Capture efficiency
  • Troubleshooting
  • Adjustment of internal springs

In the addition "Demounting of Gas Spring" it is described how to demount and remount a gas spring of an extraction arm.
This document is relevant in connection with the longer models in System 75 and System 100.

In the document "Capture Efficiency" we give advise and guidance on how to achieve the best capture efficiency with our extraction arms.
We give advice on choise and positioning of the hood in relation to the pollution type and surroundings.

How and with what can an Alsident® Extraction arm be cleaned ?
This you will learn in the document "Cleaning".

"Test and Approvals" is an overview of all the EX- (ATEX) and ESD-tests of our antistatic Systems 75 and System 100 and also the ESD-test and approval of System 50 antistatic.
The test reports can be downloaded under "Test reports".

 
 
Alsident System A/S    Finlandsvej 10    DK-8450  Hammel    Phone: 86 96 50 00    info@alsident.com    
All content ©2011 Alsident System A/S