END USER   INSTALLER   SPECIFIER
Transparent, chemical resistant or antistatic  Alsident System 100
End-user  //   Products  //   Hoods  //   System 100

System 100 Hoods in Aluminium, Antistatic and Chemical Resistent

Accessory Overview:   Click on the article no. to open product specifications.
Alsident® system 100
AL AS CR application
Hoods
Dim. [mm]
Article no.
Hoods
Article no.
Hoods Article no. Application
System 100 AL Metal hood 200 alu
200
System 100 AS Metal hood 200 System 100 PP Metal hood 200 1-10024-7-5
Metal hood: Recommended for hot gases, fumes and light dust concentrations etc.
Increased effeciency at an angled position.
System 100 AL Metal hood 200 lak
200
 
System 100 Metal hood 360 alu 350 1-10036-5 System 100 AS Metal hood 360 1-10036-6
System 100 AL Metal hood 360 lak 350
System 100 AL Round hood 385
385

System 100 AS Round hood 385

System 100 PP Round hood 385 1-10035-7-5
Round hood: For light fumes/gases and open vessels.
Increased efficiency at an angled position.
System 100 AL Round hood 500
500
System 100 AS Round hood 500 System 100 PP Round hood 500 1-10050-7-5
System 100 AL Flat screen hood 420x280 mm
420 x 280
System 100 AS Flat screen hood 420x280 mm System 100 PP Flat screen hood 420x280 mm 1-1004228-7-5
Flat hood: Especially for heavy fumes/gases. High efficiency when placed vertically on a surface. 
The hoods for Alsident® System 100 are all incl. a stub pipe.
 

System 100 AL:

The hoods for System 100 AL are made of transparent PETG and  aluminium - both anodized and powder coated.The white plastic parts are made of polypropylene (PP). The hoods of transparent PETG are resistant to most common detergents and cleaning with alcohol. 
System 100 AL extraction arms and hoods are for the use in common working environments without any specific requirements to conductivity or chemical resistance
 

System 100 AS:

It is important to select an antistatic hood for the antistatic extraction arm to keep the conductivity. It is highly important when the extraction arm is mounted in ESD areas and EX areas (ATEX).
The antistatic hoods are in chromated (TCP) aluminium or conductive polypropylene (PP) - depending on the model. 

System 100 PP:

The material of the hoods are chemical resistant polypropylene (PP) or powder coated aluminium.
The two round hoods and the flat screen are all made of 100% PP. PP is resistant to a wide selection of chemicals and consequently, the PP hoods are applicable to most aggressive working environments. However, metal hood Dia. 200 is made of powder coated aluminium which makes it less resistant. The chemical resistant extraction arms with  System 100 PP hoods are applicable to chemically aggressive working environments.
 

Optimal position of the hood:

Under the menu "Optimal position of the hood"  you find an explanation in greater detail of how to position the hood considering source and type of pollution.

Download files:
file
description
Brochure on System 100 with a complete overview of all the article nos. for this system. In A4-printable pdf.
Test report for different hoods and positions. Tested by the Danish Technological Institute.
Manual on cleaning and maintenance of System 100, adjusting the spring and best position of the hoods.

 
Alsident System A/S    Finlandsvej 10    DK-8450  Hammel    Phone: 86 96 50 00    info@alsident.com    
All content 2011 Alsident System A/S