END USER   INSTALLER   SPECIFIER
System 100 – powerful, self-supporting and flexible extraction arm
End-user  //   Products  //   Extraction arms  //   System 100 - (Ø100)

System 100 in Aluminium, Antistatic and Chemical Resistant

System Overview:   Click on the article no. to open product specifications.
      

alsident® system 100

AL

 AS CR
Table 2-joints
Working
Range [mm]
 Article no.

Table 2-joints

 Article no.

Table 2-joints

 Article no.
795

100-55-1-5

 100-55-1-6 100-55-1-7-5
Table 3-joints
Working
Range [mm]
 Article no.

Table 3-joints

 Article no.

Table 3-joints

 Article no.
1040
1185
1370
1710
2130
Wall 2-joints
Working
Range [mm]
 Article no.

Wall 2-joints

 Article no.

Wall 2-joints

 Article no.
795 100-55-2-5 100-55-2-6 100-55-2-7-5
Wall 3-joints
Working
Range [mm]
 Article no.

Wall 3-joints

 Article no.

Wall 3-joints

 Article no.
1040
1185
1370
1710
2130
2630
Ceiling 3-joints
Working
Range [mm]
 Article no.

Ceiling 3-joints

 Article no.

Ceiling 3-joints

 Article no.
1185
1370
1710
2130
2630
* with 1 gas spring
** with 2 gas springs
 
 

Alsident® System 100 - for air volumes between 140 - 400 m3/h and in diameter Ø100.

System 100 is applicable in trades with large pollution sources and large amounts of pollution, such as laboratories, hospitals, chemical industries, pharmaceutical industries as well as food industries, universities and machine shops.
 
In System 100 PP (chemical resistant), both joint and pipes are made of very resistant polypropylene (PP) and is therefore very suitable for use in aggressive working environments using strong chemicals.
 
System 100 Antistatic is approved for use in both explosive EX-areas (ATEX) and in ESD-areas.

ESD and EX approvals

Alsident® System 100 Antistatic is approved for use in EX areas (ATEX areas) according to standards EN 13463-1:2001 paragraph 13.3.4.7 and IEC 61340-4-1:2003 and are marked accordingly: EX II 1 GD
System 100 Antistatic is also approved for use in ESD areas by both the Danish DELTA and the German BAM according to IEC 61340-5-1 and IEC 61340-4-1.
Therefore, System 100 Antistatic extraction arms are supplied with an earthing wire for EX areas. For ESD areas, an earthing wire with 1MW resistance is also enclosed separately. You will find further information in the test reports and the mounting instructions.
In ATEX areas we recommend brackets made of acid proof stainless steel, which is considered spark free and therefore in compliance with EN 1127-1 5.3 'Mechanically generated sparks'.
Please note that the end user is liable for making the risk assessment of the entire installation.
Alsident System A/S also recommends the earthing of the extraction arm to be carried out by personnel experienced in EX areas.

Working ranges

An internal spring carries the short Alsident® System 100 arms, whereas the long models are carried by 1 or 2 external gas springs. This gives system 100 a maximum working range of 2630 mm.
System 100 extraction arms are prepared for a quick installation with standard brackets for table, wall or ceiling. With the wide range of hoods, it is therefore possible to choose the best extraction arm for your individual work station.
 
An extraction arm from Alsident® System is built of 3 basic elements: an extraction arm, a bracket and a hood. Select each basic unit to obtain a set.

Special solutions
In addition to our standard range, we are able to deliver special solutions adapted to customer specific needs. Our technical department is always at your service with advice. For further information please contact your Alsident® dealer.
Please remember that we offer short delivery times for both standard and special solutions of the best Alsident® quality.
 
Technical Specifications:
 
 
 
aluminium
antistatic
chemical resistent
Recommended Airflow:
Normal:
Minimum:
Maximum:
 
270 m3/h
140 m3/h
400 m3/h
 
270 m3/h
140 m3/h
400 m3/h
 
270 m3/h
140 m3/h
400 m3/h
 
 
 
 
Air Temperature:
-15°C - +90°C
-15°C - +90°C
-15°C - +90°C
 
 
 
 
Materiald:
Pipes:
Diameter:
Joints:
O-rings:
Flanges:
Damper:
Thumbscrews:
Threaded Stays:
 
Spring:
 
Gas spring:
 
Anodized aluminium
Ø100 mm (external)
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP)
Acid-proof stainless
steel (AISI 316L)
Acid-proof stainless
steel (AISI 316L)
Steel (also available
in stainless steel)
 
Conduktive polypropylene (PP)
Ø100 mm (external)
Conduktive polypropylene (PP)
Conduktive polypropylene (PP)
Conduktive polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP)
Acid-proof stainless steel
(AISI 316L)
Acid-proof stainless steel
(AISI 316L)
Steel (also available in stainless
steel)
 
Polypropylene (PP)
Ø100 mm (external)
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Polypropylene (PP)
Polypropylene (PP)
Acid-proof stainless
steel (AISI 316L)
Acid-proof stainless
steel (AISI 316L)
Steel (also available in
stainless steel)

Download files:
file
DESCRIPTION
Brochure on System 100 with a complete overview of all the article nos. for this system. In A4 printable pdf.
Test report for different hoods and positions. Tested by the Danish Technological Institute.
Manual on cleaning and maintenance of System 100, adjusting the spring and positioning the hood.
Link to mounting instructions for System 100, both ways of mounting and on English, German and Danish.
Test report for EX-approval (ATEX), by the Danish Technological Institute.
Test report for ESD-approval, tested by danish DELTA (www.delta.dk)
Test report for ESD-approval, tested by german BAM
To determine the pressure drop at a specific air flow.
Choose the correct extraction arm. The working area of each model is illustrated in these diagrams.

Alsident System A/S    Finlandsvej 10    DK-8450  Hammel    Phone: +45 8696 5000    Fax: +45 8696 5010    info@alsident.com    
All content ©2011 Alsident System A/S