END USER   INSTALLER   SPECIFIER
Alsident System 50 Flex  with self-supporting flexible hose
End-user  //   Products  //   Extraction arms  //   System 50 Flex - (50)

System 50 Flex in Aluminium and Antistatic

REMEMBER THE ACCESSORIES
Brackets and other accessories to be ordered separately. 
Click below for accessories for System 50 Flex:

Hood: A suction pen goes always with the System 50 Flex
 
 

Click on the article Nos. to open product specifications.

 
alsident® system 50 Flex
AL
AS
+ joint colour
 
Table 0-joint
Working Range [mm]
Basic
Article no.
Red
White
Black
Table 0-joint
Article no.
Alsident® System 50 Flex - 0-joint
600
-4
-5
-050
Alsident® System 50 Flex - 0-joint
Table 1-joint
Working Range [mm]
Basic
Article no.
Red
White
Black
Table 1-joint
Article no.
Alsident® System 50 Flex - 1-joint
700
-4
-5
-050
Alsident® System 50 Flex - 1-joint
 
Table 2-joints
Working Range [mm]
Basic
Article no.
Red
White
Black
Table 2-joints
Article no.
Alsident® System 50 Flex - 2-joints
900
-4
 
-5
 
-050
Alsident® System 50 Flex - 2-joints
 
 
 
   
 

Alsident® System 50 Flex - for air volumes between 45 - 85 m3/h and in diameter 50.

System 50 Flex is applicable in trades with small pollution sources such as the electronics industry, laboratories, nail salons and decorator workshops.

ESD approval

Alsident® System 50 Flex Antistatic is approved for use in ESD-areas according to IEC 61340-5-1 and therefore has a wire with a resistance of 1 MW attached to the socket pipe. You will find more information in the test report from DELTA and in the mounting instructions.
 
Tested by impartial test institutes
 
Alsident System A/S is the only manufacturer who have their extraction arms tested thoroughly by acknowledged impartial test institutes. We have our extraction arms tested by Danish Technological Institute, Delta and German BAM.

Special solutions

In addition to our standard range, we are also able to deliver special solutions adapted to customer specific needs. Our technical department is always at your service with advice. For further information please contact your Alsident® dealer.
Please remember that we offer short delivery times for both standard and special solutions of the best Alsident® quality.
 
Technical Specifications:
  
aluminium antistatic
Recommended Airflow:
Normal:
Minimum:
Maximum.
 
65 m3/h
45 m3/h
85 m3/h
 
65 m3/h
45 m3/h
85 m3/h
Materials:
Pipes:
Diameter:
Joints:
Flexible hose:
Rings:
O-rings:
Flanges:
Damper:
Thumbscrew:
Threaded Stays:
 
Spring:
 
Anodized aluminium
50 mm (external)
Polypropylene (PP)
Conduktive plastic
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Acid-proof stainless steel
(AISI 316L)
Acid-proof stainless steel
(AISI 316L)
 
Chromated aluminium (TCP)
50 mm (external)
Conduktive polypropylene (PP)
Conduktive plastic
Polypropylene (PP)
Conduktive polypropylene (PP)
Conduktive polypropylene (PP)
Polyethylene (PE)
Polypropylene (PP)
Acid-proof stainless steel
(AISI 316L)
Acid-proof stainless steel
(AISI 316L)
 
Download files:
File
Description
Brochure on System 50 Flex with a complete overview of all the article nos. for this system. In A4 printable pdf.
Test report for different hoods and positions. Tested by the Danish Technological Institute.
Manual on cleaning and maintenance of System 50 Flex, adjusting the spring and positioning the hood.
Link to mounting instructions for System 50 Flex, includes both English, German and Danish.
Test report for ESD-approval, tested by DELTA (www.delta.dk).
To determine the pressure drop at a specific airflow.

 

Alsident System A/S    Finlandsvej 10    DK-8450  Hammel    Phone: 86 96 50 00    info@alsident.com    
All content 2011 Alsident System A/S